Reviews about the “Benelli Vinci” will allow you to objectively determine the significance, features and abilities of a smoothbore gun. It refers to innovative semi-automatic modifications that combine multiple technical achievements and the solidity of classic variations. The uniqueness of the design lies in the basic modular system, which makes it possible to disassemble the product into three parts without the use of special tools.
Trunk
The owner’s reviews of the Benelli Vinci further confirm the nuance that the free-floating barrel of the gun aggregates in one piece with the inertial reloading system such as the Vinci Inertia System and the slide box.
Many users note that the weapon in question shows a stable accuracy of firing, including steel, lead shotguns and bullets of suitable caliber. A similar indicator is achieved due to the original method of mounting the stem on one axis with the specified inertial circuit. When fired, mechanical action is transmitted to the rigid block, minimizing deformation and vibration of the element.
Features
The Benelli Vinci gun system, reviews of which are mostly positive, is activated with a single spring, which simplifies the operation of the main structure as much as possible, providing ease of maintenance, operation and increasing the efficiency of the device.
The weapon barrel is equipped with an elongated flat recoil stop that moves in the direction of the hull. The entire shutter sliding process is optimally configured with movement of the base. This contributes to an even distribution of interacting moments, providing a perfect balance and minimal twitching when firing. Moreover, this feature applies to both single volleys and bursts of bursts.
The interchangeable chuck nozzles and barrel of the Vinci Black shotgun are thermally processed using the Crio System. Cryogenic finishing technology reduces the internal stress of steel and seals the barrel walls. The working part during heating is heated less than conventional analogues, while the deformation elasticity becomes lower and more stable. Another advantage of this treatment is the reduction in the friction force of the fraction, which reduces deformation and high-speed charge indicators. The battle is optimized, accuracy increases by 13 percent compared to competing versions of this category. Reviews about the “Benelli Vinci Black 760” additionally confirm the fact that the barrel, which has undergone cryoprocessing, becomes more resistant to various influences. This significantly increases the life of the weapon and its main parameters.
Carriage
Specialists of the company embodied a new element (carriage) in the design of the weapon in question. It includes a combination of the receiver and forend, including firing device, safety bracket, locking device, reflector, rammer, return and eject mechanism.
The front part of the gun mount Benelli Vinci is connected to the barrel using special hooks that aggregate with a sliding cuff. The back block is fixed by means of correction plates for deflection. Disassemble and assemble the gun without tools gives the absence of pin and screw fasteners.
Score
This unit is located in front of the carriage. The clip is attached to the barrel by a single rotational movement, which makes it possible to quickly change stores on the hunt. In states whose law provides for the operation of only fixed clips, a special version of these weapons has been developed.
The M-245 type store itself is equipped with a limiter up to two charges. The sleeve length of suitable cartridges is 76 millimeters. The design of the charging socket allows you to install ammunition even with gloves. The discharge of the clip is carried out by pressing the provided button lever. The type of trigger mechanism is designed with reference to the requirements of the greatest possible ergonomics and the convenient location of the finger on the trigger. The grooved surface of the forend with a variable cross-section is made according to the V-Grip technology, which helps to ensure a reliable grip and reduces sliding.
Butt
In their reviews of the “Benelli Vinci”, users note that the butt of the gun is combined with a locking casing using a unique quick-release lock. It is possible to separate or replace the element in question in a few seconds, by means of a quick rotational movement.
Parts of the stock correspond to the innovative ComforTech Plus recoil leveling system. The item is equipped with 12 cutouts that are diagonally from the neck to the heel. Due to this feature, the butt of the gun has a high rate of elasticity, which reduces recoil during firing. The smooth plane of the unit guarantees its free sliding on the cheek of the owner, providing protection to the face from mechanical damage.
The manufacturer positions the presented product as the fastest semi-automatic gun in the world. Design features and the introduction of innovative technologies have made it possible to absorb impact, maximize rate of fire, reduce vibration and drop the barrel. In reviews of the “Benelli Vinci, ” users indicate that while the owners of other models aim their weapons after the shot, the hunter with the specified modification manages to hit another target. The neck of the butt has a corrugated texture with polymer elements. The QuadraFit function allows you to adjust the parameters without special tools.
Technical plan options
Among the main characteristics, taking into account the feedback from the owners of Benelli Vinci, the following points can be noted:
- Caliber - 12.
- Ammunition used - 12/70, 12/76.
- Trunk length (in mm) - 650-700-750 mm.
- Types of muzzle contractions - 0 / 0.25 / 0.50 / 0.75 / 1.0.
- The capacity of the clip, depending on the modification - 2/3/5/7/9 charges.
- A species of fly is a fluorescent red model.
- Features of the stock - length is 365 mm, adjustable to the right and left sides.
- The deflection at the front end of the ridge is 39 mm.
- The barrel material is steel.
- The butt plate and comb are made of ergonomic polyurethane and elastomer.
- The mass of the weapon is 3.15 kg.
Modifications
On the domestic market there are several versions of the gun in question:
- "Benelli Vinci Black." Customer reviews indicate the greatest popularity of this modification among hunters.
- Variant Camo Max4.
- Model Desert Dune.
- Amazonia Green.
- Super Vinci.
- Benelli Cordoba.
Disassembly
The implementation of this procedure requires compliance with certain rules and stages:
- Before disassembling, the weapon must be completely defused.
- Then press the button of the ammunition limiter and close the shutter.
- Activate the mounting latch, and then rotate the magazine cover counterclockwise.
- Disconnect the receiver module and carriage, moving the last element forward.
- The stock from the base is uncoupled by turning 90 degrees clockwise.
- Press the thumb on the damper bolt plate, releasing the upper protrusion and fixing the node in the rear extreme position.
- Remove the reload handle, remove the shutter from the modular part.
- Dismantle the striker clamp, holding the striker and spring from accidental loss.
- They take out a combat larva and an inertial clamp.
- The weapon is put on the fuse, after which, using a punch, the trigger is removed (trigger mechanism).
- Turn the store until the button changes the shape of the mounting latch, then shift it, disconnect the clip.
According to reviews of Benelli Vinci Super, modifications to a non-removable type store do not require disconnecting the charger tube from the carriage during disassembly.
Assembly
This procedure is carried out in the following order:
- Press the limiter button, mount the front part of the trigger in the carriage jack (the trigger must be cocked). Next, the block is rotated down to install in its place.
- The protruding edge of the mainspring is displaced, re-press on the trigger, putting it completely.
- USM is attached using a fixing pin.
- The removable clip is placed in the carriage, paying attention to the fact that the latch latch and its socket are located in one line.
- Put an inertial spring in the compartment between the shutter body and the larva.
- After installing the last node, mount the striker with a spring, which are mounted by means of a special pin.
- The shutter is installed in the casing, then the reload handle is placed in the compartment for fixing on the shutter.
- The restriction spring is shifted down so that the upper protrusion is embedded in its seat.
Maintenance and cleaning
Reviews of the “Benelli Vinci Super Sport” make it clear that gun care must be carried out in a fully discharged state. The main service complex includes several mandatory manipulations:
- Trunk cleaning after each use.
- Regular removal of carbon deposits from powder gases and foreign objects, followed by lubrication of parts.
- Processing with appropriate materials of the bolt group.
- Lubrication of external parts that are actively in contact with the atmosphere.
- Cleaning muzzle and landing blocks, including the store.
When servicing the gun, it is recommended to use branded accessories and Benelli oil. Care for the clip requires attention and extreme caution, as a spring can pop out if handled ineptly, causing serious injury.
Store Maintenance Procedure:
- The clip is pre-discharged, modifications of the M-515 or M-640 type are also released from the mounting collar.
- On non-removable versions, a special button is pressed, moving the work tube forward until the plug of the plug is shown.
- The fixing screw is unscrewed using a 2.5 mm hexagon.
- The spring will push out the limiter and the plug under its influence.
- They take out the pusher of ammunition, clean all the elements, fix the stopper with a screw.
- The detachable clip is attached to the weapon, and on the static analogue the tube of the store is moved to its original position.
Types and types of charges
For firing from the weapon in question, cartridges with a sleeve length of 70 or 76 millimeters can be used. Attention should be paid to the fact that charges should be used that provide sufficient recoil force that does not interfere with the functioning of the automatic reloading system. At the same time, adjustment of models when firing with charges of various power is not required.
At the very beginning of the operation of a new gun, delays are sometimes observed when shooting with low-power cartridges. In this case, experts advise to shoot 2-3 packs of ammunition with a standard powder power indicator. Cartridges are changed manually or with the help of a cutter (applies to charges in the chamber). Before performing this operation, you should put the weapon on the fuse and point the barrel in the safe direction.
With mechanical replacement, the butt rests on the thigh and opens the bolt. As a result, the charge is removed from the barrel and thrown to the side. Then, a new ammunition is installed through the discharge socket, releasing the bolt. If a cutter is used, the butt also rests on the thigh, then the limiter button is pressed, and it is moved down. After the cartridge leaves its place and is discarded, the bolt handle is lowered, the new ammunition is automatically fed into the chamber.
