The lack of a bottle opener is an unpleasant situation. Especially in an awkward position the owner of the house in which the party takes place. It is annoying when the question of how to tear off the caps in beer bottles was completely left out of sight. But the situation is fixable if you know how to open beer with a lighter.
Bottle Opener Replacement
An ordinary plastic lighter in skillful hands is far from the worst tool for removing bottle caps than the opener itself. The lighter can be used as a lever. Exactly the same principle applies when using an opener.
Usually both hands are involved: one holds the container and the edge of the lighter under the removable lid, the second lid breaks off the neck.
What other methods exist?
In the absence of openers and lighters, the procedure for uncorking bottles can be performed using other, also very effective, means:
- Door latch. A lid is placed in it. The latch is a small metal square that holds the doors closed. When uncorking beer, force is applied from below.
- Ring or signet.
- Waste CD.
How easy is it to open a beer?
The lighter for this purpose is the most convenient to use. Not everyone wears a ring, and an old and unnecessary disk may not always be at hand. In such cases, the person wonders: how to open a bottle of beer? There are two ways to do this with a lighter:
- The lid can be torn off the neck.
- Possessing a certain technique, it can be skillfully poked.
How to open beer with a lighter by tearing the lid?
This procedure consists of several stages:
- Take a bottle of beer so that your hand is located closer to the neck. In this case, the index finger should cover almost the entire space around the cover. In order for the opening procedure to be completed faster, you need to press your finger as tightly as possible to the lid, and push the lighter deeper under its edge.
- The thumb in this case is a support holding the makeshift opener under the removable beer lid. With the second hand, pressure is applied to the lighter, which performs the function of a lever. Forceful action must be carried out until the lid flies off.
What should be considered when tearing the lid?
- Before opening a beer with a lighter, it is necessary to place it correctly relative to the bottle. Ideal for this method is perpendicular arrangement.
- The pressure should first be smooth. The force is applied at the end, when there is confidence that the improvised opener will not slip out. It is important to hold the metal part of the lighter tightly. With strong pressure down, the cover is torn off.
- In order for the lighter to fit better under the edge of the lid, you need to push it with your finger under the edge of the neck.
- It is not recommended to perform this procedure with the rounded corner of the lighter. Better if it will be a long plastic end.
- In some cases, the cover may be angled. With parallel pressure on the bottle, all power is concentrated on the lighter.
Second way
It also uses the index finger, which performs the function of holding the neck of the bottle. This technique for removing covers differs from the first in some nuances. Before you open beer with a lighter using this technology, you must:
- Take a tight girth bottle, which should be at some distance from the person. In this case, the hand with the lighter should be bent a little so that it forms the letter “e”. When moving the wrist with the bottle opener from the bottle, with the hand that holds it, a slight twisting movement is performed, which is necessary to tear the lid off the neck.
- The opener should be securely locked in a fist. Most of it must be hidden in the hand. Uncorking occurs only at its edge.
- The lighter is parallel to the thumb. They are located on opposite sides of the bottle.
- The neck of the bottle should be between the thumb and the rest of the fingers.
- When opening the movement of the hands should be carried out towards the bottle. One hand, located below, holds the container tightly, and the lighter, clamped in a fist, lowers its free end to the base of the bottle. Thus, the lighter is used as a small crowbar, which has an emphasis in the thumb area.
